Nozzle Check Epson Printer Without Computer

How to nozzle check Epson Printer without computer

Here are the steps / procedures nozzle check Epson printer spray head results:

1. Plug the power cord

2. Press and hold the resume button (ink)

3. Hold and hold the power button (the two buttons are pressed)

4. Wait 2 seconds for the green light on the power button to turn on

5. After the green light on the power button lights up, release the power button (resum button still stuck)

6. Wait a few seconds until the printer mechanic spins

7. Release the resume button.

8. Good luck

Read more »

HOW TO EASILY REPAIR CARTRIDGE THAT IS SUBJECTED / MAMPET

How to Fix Clogged / Clogged Cartridge.

Most people buy printers and wear them only when they need them right away, then they leave their printers littered in a week, a month or even years without any maintenance. And usually this is done by students or students.

They are actually looking for a shortcut to save money in printing files / learning materials, but in fact they menyianyiakan goods they have purchased. Even the printers they bought plus modif infus. The printer when it is opened the cartridge cover it would be good in use routine so as not to dry in the head / mouth spray cartridge. It should be used once a week, but most of them are busy, forget, lazy to do that. Yes what can be made, the printer they buy must be clogged / clogged / dry.


Here I will tips Tips to fix clogged / clogged Printer Cartridge:

1. Surely it has a Magic liquid cleaning fluid ink cleaners. This liquid is very powerful in eradicating stubborn ink deposits. This fluid intentionally intended to repair the cartridge and also the printhead.
2. Prepare the cartridge or something that can hold the liquid cleaner.
3. Pour the liquid cleaner to a height of only 3-5ml. Because what we will soak only the cartridge head.
4. Ink cartridge, soak the head head and do not let the liquid cleaner wetting point connector point. If oun already wet no problem. And leave for 1 night.
5. The next day lift the cartridge from its place and try it.
6. I've been doing this for over 5 years and it works.
7. This applies only to clogged cartridges because they are never used, the way they can not be done for an outdated cartridge or a weak spray.

DO NOT IN HOT WATER. THAT WILL ONLY MAKE THE HEAD OF CARTRIDGE HANCUR.

Read more »

SERVICE MAINBOARD EPSON T13, L100, TX121, L200 THAT IS OFF

Very often I deal with total dead printer problems on this type of L100 / t13 / tx121 / L200

more or less this type of printer still has kareakter or layout of components that are almost the same. so this total dead printer service can be applied to that type of printer.



just follow the way Service Board Epson TX121, L100 and L200 are dead total:

1. Make sure the power supply epson printer is in good condition
2. The damaged parts are Mainboard Epson T13x, TX121, L100 and Epson L200
3. Most die because the diodanya break, you can replace it with a diode similar to the Schottky Diode. For the replacement of diodes that are not similar can cause the motor ic shorted.
4. Rounded SB160 series round diodes can be replaced with SR160
5. SMD box diode broken SS16 / SS14 series
6. The location of the replaced diode is close to Fuce.
7. Before switching it should be tested first with Multitester to make sure the Diode is completely damaged
8. Good luck

Read more »

EPSON L300 BLINK PAPER INK AND POWER TOGETHER - PF ENCODER F3 H, 50H

Epson printers have different types of damage, but on this Epson printer almost on each type can be checked for damage by using software reseter on the menu "Printer Information Check". There is very obvious damage with random in the show by the error code.



This time caraserviceprinter.com will share a tutorial on how to service the Epson L300 printer with damage "Blink Paper, Ink and Power Simultaneously". After the check with software reseter damage seen showing Last Fatal Error Code F3 H and Last Fatal Error Code 2 is 50 H. Damage F3 H is read as damage to PF Encoder (Paper Feeding Encoder) or we describe as Sensor Paper. The location of this sensor on the side that reads round plastic. If a normal sponsor would not pose a new problem at 50 H error. So the last kind of damage to the Last Fatal Error Code is the key to some of the damage that the Adjusment Proggram software reads.

Berikut Video lengkap cara mengganti Sensor Kertas (PF Encoder) :

Hopefully useful, do not forget Like and Subscribe channel Youtube caraserviceprinter dot com.

Read more »

How to solve Epson T1100 turned on just blinking green light

This is the author's experience of the last few days, from the number of printers that come in there are 2 same printer janis and with the same damage model. That is Epson T1100 printer which when turned on just blinking green in the power lamp without any mechanics that move at all.



First to experience this kind of damage the author thinks the damage is on the power supply is unstable or problematic. Then the author try to replace the power supply from a normal printer but in the end there is no change in the printer T1100 aka the same condition is blinking green in the power light. The second step, the author try to change the mainboard with a normal printer and there was a change. The printer is back to normal and usable. So have started to conceal the location of the damage that is on the mainboard, but on what components are damaged? That's a question in the author's mind.



If mainboard flame means not on 2 transistors standing. Neither on fuse nor diode. This is an experiment which, according to the authors, is no risk because the mainboard condition has been error. The author experiment is by replacing IC eeprom with new IC. The location of IC EEPROM is adjacent to the socket pin of the incoming current of the power supply. This EEPROM IC has 8 feet. The following steps the author to replace IC EEPROM:

1. Prepare Blower / steam solder

2. Prepare a new EEPROM IC

3. Remove IC EEPROM on mainboard T1100

4. Install the new EEPROM IC to the T1100 mainboard

5. Backup and Restore using AdjusmentProg / Software reseter

6. See the results



That's what the author did when he found the damage to Epson T1100 printer that only blinks green when press the power button.

Thanks.



Visit also Video tutorial on Youtube Channel: caraserviceprinter dot com

Read more »

BROKEN PW SENSOR / CR MOTOR ON PRINTER T1100, 1390, L1300, L1800

Epson T printer 1100, 1390, L1300, L1800

This series printer has the same type of damage. If we take from the conclusion of the title usually damage occurs on the pw sensor and can also damage occurs in CR Motor (dynamo). It is from the mechanical part that causes general errors.

Easy steps to solve the damage is by replacing the sensor pw or crmotor that can be purchased from the printer spare parts store.

But did not close the possibility of damage occurred in other parts. For that step more details can check with Reseter Software each type of printer.

Read more »

HOW TO RESET CANON G1000 PRINTER, G2000 WITHOUT REPLACE EEPROM

HOW TO RESET CANON G1000, G2000 WITHOUT REPLACE EEPROM

In the year 2017 Canon apparently did not want to lose with the brand next to which has long brought the concept of injek model printer or infusion. Canon parties themselves seek to profit beyond the sale of cartridges and expanded its wings on Canon's original ink sales. As we know, Canon itself has always only sold printers with cartridges and most people have their own infusion modifications at printer service locations in each city. Surely it makes sales decrease Cartridge from Canon itself, so in the Year 2017 this Canon seeks to make any changes to the printer is worth the money, from the sale of Printer, Cartride, and also Ink. One more that is how to Reset Mainboard or Ink Pad Counter.


How to reset the mainboard canon G1000 series, G2000 is different from the way the series reset previous series that can be downloaded easily and in the reset itself. While this time Canon try the luck on paying reseternya.

Some technicians have different ways of resetting the canboard mainboard G1000, G2000. There is a replace EEPROM on the mainboard there is also a short way that is Reset Paid.



Here's Video How to Reset Canon G1000, G2000: Video catch up

Read more »

FREE DOWNLOAD RESETER EPSON L1300

Epson's renowned Product or Brand has changed the way of attracting their customers. Although the price is three times the price of the brand next to the fact not make epson product sales down, even always overload alias out of goods. Epson heavily released its flagship product L series, among which there are L110, L120, L220 etc. Surely it all started from their previous product that is none other than the Epson L100. Epson L100 itself has stopped production for a long time, Epson L100 according to the Epson and Technicians still have many drawbacks at the speed of print / print is too slow and also the mainboard is easy short / short circuit causing the mainboard / motherboard printer to die total. But it can still be anticipated or improved.

In this year Epson felt rivaled with the product sebelaH, because it also issued a modif infusion from the factory. But Epson has another strategy to change its counter reset system. For that Epson mengehentikan products without infusion and launched products Infus from the factory that can be rely on for home needs as well as printing. Inks are also heavily in production by Epson Brand and mass-sold. But there is a very unfortunate of the product update this time is Reset Counter Ink or ordinary people call it with the term Mainboard Reset. Reset Mainboard L1300 is different from previous products, reset L1300 not everyone can, because using license / license paid. The Epson party itself entrusted the mainboard reset to every town in Outlets - outlets that have been verified as Autorized Epson Service to reset the L series Printer mainboard. They use a reset kusus provided by the Epson who has been licensed and can not copy and paste on another computer.

Not an Indonesian if not Hack reseter hehe,

King Printer itself can do Reset Ink Pad Counter / Reset Mainboard all Epson printers without replacing components.

If trouble please bring to our place. Our location / map is in the right bar.

To reset the Epson L1300 printer Please visit this page >>>   FREE DOWNLOAD RESETER EPSON L1300

Read more »

HOW TO EASY PRINTER EPSON L1800 RESET

Lately Epson Product or Brand prominent released its flagship product that is L series, among which there are L110, L120, L220 dll. Surely it all started from their previous product that is none other than the Epson L100. Epson L100 itself has stopped production for a long time, Epson L100 according to the Epson and Technicians still have many drawbacks at the speed of print / print is too slow and also the mainboard is easy short / short circuit causing the mainboard / motherboard printer to die. But it can still be anticipated or improved.


In 2017 this time Epson feel rivaled with the next product. For that Epson stoping product without infusion and launched Infusion products from the Factory. Inks are also heavily in production by Epson Brand and mass-sold. But there is a very unfortunate of the product update this time is Reset Counter Ink or ordinary people call it with the term Mainboard Reset. Reset Mainboard L1800 is not everyone can, because it uses license / license paid. The Epson party itself entrusted the mainboard reset to every town in Outlets - outlets that have been verified as Autorized Epson Service to reset the L series Printer mainboard. They use a reset kusus provided by the Epson who has been licensed and can not copy and paste on another computer.


To reset the Epson L1800 printer Please visit this page >>> ALL RESETTER EPSON

Read more »